DESCRIPTION
The JaourMelt® 3587 is a synthetic rubber based hot melt adhesive
specifically developed for construction applications of nonwoven
disposables. The product is florescent free, light color and with
excellent heat stability. It is with good machinability and
provides good penetration and wettability to various substrates,
high bond
strength and tack.
TYPICAL PROPERTIES
| Appearance | Water white translucent solid |
| Color (Gardner) | ≤ G2 |
| Softening Point (R&B) | approx. 82°C |
| Viscosity (Brookfield) : | |
| @120°C | 8600 cps |
| @140°C | 4500 cps |
| @ 160°C | 1800 cps |
| @180°C | 960 cps |
SUGGESTED USES
Premium grade of construction adhesive for nonwoven disposable
applications.
OPERATING GUIDES
The material can be applied by all types of elastic spray and slot
applicators. Suggested operation temperature is 150 - 180°C,
depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg block wrapped with siliconized release paper, 20kg/box, or with
meltable film, 20 or 25kg/box. Please consult the sales
representative for further information.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 350°C and above
100°C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated.Rotate stocks and using the oldest stock first.
HAZARDS INDENTIFICATION
The product is not considered as hazardous within the meaning of
the valid (EU) preparation directive.
Skin Contact : Molten product adheres to the skin may cause burns
Eye Contact: Direct contact may cause eye irritation.
Inhalation : Negligible hazard at ambient temperature. Vapors
and/or aerosols which may be formed at elevated temperature may be
irritating to eyes and respiratory tract.
Ingestion : No evidence of harmful effects from available
information.
COMPOSITION / INFORMATION ON INGREDIENTS
| Component | CAS# | % |
| Styrene block copolymers | 25038-32-8, 9003-55-8 | 15 - 30 |
| Hydrocarbon resins | 64762-16-1 | 45 - 65 |
| Cycloalkyl process oil | 64742-52-5 | 15 - 35 |
| Antioxidants | Mixture | <1 |
FIRST-AIDS MEASURES
Skin Contact :
Molten product. Immediately cool down the affected area by flushing
with cold
water to dissipate heat. Seek medical attention.
Eye Contact :
If hot, immediately cool down the affected area by flushing with
cold water to
dissipate heat. Get medical attention promptly.
Inhalation :
Move to fresh area. Get medical attention if irritation persists.
Ingestion :
No harmful effect expected.
