Home > Hot Melt Pressure Sensitive Adhesive >

HMPSA Hot Melt Glue Gum Used For Paper Film Labelstock Adhesive Lamination

Product Categories

Hot Melt PSA Adhesive [85]
Hot Melt Pressure Sensitive Adhesive [75]
PSA Pressure Sensitive Adhesive [26]
PSA Glue [28]
Hot Melt Glue Adhesive [17]
Hot Melt Adhesive [32]
Hot Melt Rubber Adhesive [14]
Hot Melt PSA [36]
Hot Melt Glue [43]
Polyolefin Hot Melt Adhesive [18]
Hot Melt Adhesive For Labels [67]
Hot Melt Adhesive For Hygienic Products [33]
Hot Melt Adhesive For Industry Tapes [41]
Hot Melt Adhesive For Medical Products [42]

Shanghai Jaour Adhesive Products Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

HMPSA Hot Melt Glue Gum Used For Paper Film Labelstock Adhesive Lamination

Ask Lasest Price
Brand Name :	JAOUR
Model Number :	NA
Certification :	ISO14000, ISO9001 ROHS REACH FDA
Price :	USD 1.88/kg~ USD 3.26/kg
Payment Terms :	T/T, D/P, L/C
Supply Ability :	8000 TON per Month
Delivery Time :	7 working days

Add to Cart

Product Details
Company Profile

HMPSA Hot Melt Glue Gum Used For Paper Film Labelstock Adhesive Lamination

HMPSA Hot Melt Glue Gum Used For Paper Film Labelstock Adhesive Lamination

This product is synthetic rubber based hot melt pressure sensitive adhesive specifically developed for label applications where good permanent adhesion is required.

The product is featured excellent tack and peel, good wetting to substrates and good die-cuttability.

SUGGESTED USES

Permanent labels, and other pressure sensitive applications that high tack, peel strength and good die-cuttability are required.

TYPICAL PROPERTIES

Appearance :	Yellow translucent solid
Color (Gardner) :	≤ G5
Softening Point (R&B) :	approx. 102 ℃
Viscosity (Brookfield) :	@120℃ approx. 140,000 cps
	@140℃ approx. 30,000 cps
	@160℃ approx. 10,500 cps
	@180℃ approx. 5,200 cps

OPERATING GUIDES

The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C for both, depending on machines, substrates, and plant conditions.

FDA STATUS

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

PACKAGE

6.25kg or 1kg block wrapped with siliconized release paper, or with meltable film 25kg/box. Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS

Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

Product Tags:


*From:	Your email address is incorrect!
*To:	Shanghai Jaour Adhesive Products Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!